Instructions for use: 1. Place the pipe between the rollers and the cutter wheel, the side wall of the pipe is tightly fixed to the center position of the two rollers, the cutter wheel cut, the pipe perpendicular. 2. Turn the adjustment handle to make the cutter blade, and turn evenly. 3. Turn the adjustment handle to make the cutting blade. The amount of knife should not be screwed to 1/4 turn, and the edge of the blade rotating. 4. The pipe mouth is smooth, suitable for widening. Features: Item Type: Pipe Cutter. Material: Aluminum Alloy + Aluminum. Use: Cutting. Total Length: Approx. 95mm. Width: Approx. 50mm. Blade Diameter: Approx. 20mm. Cutting Range: Approx. 4-28mm. Applicable Pipe Type: Used for cutting thin-walled pipes such as copper pipes, aluminum pipes, PPR pipes, etc. Use: Cutting. The pipe cutter is made of highly hardened incisive blade, small cutting gap, can cut iron pipes, etc. Applicable pipe type: The pipe cutter is suitable for cutting thin-walled pipes such as