Make outdoor work, a walk in the park with this T-Mech dream team! Let our heavy-duty Earth Auger dig deep with it’s impressive 3HP motor and 3 varying sized drills. Once the Auger has done its job, our easy to use Petrol Post Driver will take over. Knocking posts, stakes and pegs into the ground couldn’t be easier for this powerful 37.7cc Post Driver. We have even included FREE safety gear, carry case, tool kit and grease – everything that you need to get started, stay safe and maintain your new tools!   Post Driver Specifications: Engine: 37.7cc, single cylinder, air cooled, 4-stroke, XY139-F petrol engine Fuel: 86 octane unleaded petrol or higher Max power & speed: 900W (1.2HP) / 6500r/min Max torque & speed: 1.3(ft/lb)/5500(r/min) Carburettor type: H129-1C4/H629-1C4 Impact frequency: 700~1350 rpm Fuel consumption rate: ≤ 0.9L/h Oil tank capacity: 0.08L Fuel tank capacity: 0.65L Impact energy: up to 41 ft lbs Spark plug type: CMR6A Starter system: hand pull start Case: black & red plastic design Attachments: 1 plastic, 3 aluminium CE Approved Weight: 21.9Kg Width: 0.32m / 32cm / 12.6” Depth: 0.30m / 30cm / 11.8” Height: 0.81m / 81cm / 31.9”   Earth Auger Specifications:   Tank Size: 1.2 Litre Power: 3 HP, 9000 RPM Fuel: 2 Stroke Oil Mix - 25/1 Rotary Speed: 170-200 RPM Drill Diameter: 4, 6 and 8inch Weight: 8.6 Kg (Including Drill) Height: 1150mm / 115cm / 45.3” (+58cm when extended) Width: 530mm / 53cm / 20.9” Depth: 260mm / 26cm / 10.2”