Loops 6.5 140W Low Profile In-Wall / Ceiling Speakers 2 Pairs Overview: The LOOPS 6.5 Low Profile In-Wall / Ceiling Speaker is a 2-way speaker that is ideal for use as a main or surround sound speaker in the wall or ceiling. The concentric tweeter allows the higher frequencies to be focused at the listener and the 6.5 Kevlar Woofer cone delivers impressive bass and overall volume to help create a premium soundstage. Each speaker features an extremely low profile magnetic grille that can be easily removed, ensuring quick installation, easy cleaning access and also allows for the grill to be painted to match your decor (sprayed preferably). The unit can be mounted in wall or in the ceiling and looks almost flush when fitted. The speaker has a mounting depth of 85mm and a cut-out of 315mm x 194mm. Once cut-out, simply insert the speaker and the handy dog ear mounting clips can be secured quickly and easily.Technical Specification: 2-Way Speakers Speaker Cable Connections Push and Release Sockets Power Max 8 Ohm 140w Power RMS 8 Ohm 50w Woofer Cone 6.5 Kevlar Tweeter Cone 1 Sensitivity (1m, 1W) 90DB Frequency Response 60Hz-20kHz Impedance 8 ohms Crossover and Transformer inbuilt. Dimensions: Height 351mm, Width 231mm, Depth 75.6mm (Per Speaker)HOW TO INSTALL: 1) Select a spot where you would like to install this speaker(s). Please bare in mind that the speakers have a mounting depth of 85mm so ensure you select a spot with ample space. 2) Now make a cut of 315mm x 194mm (rectangle). 3) Connect the speaker cable you have previously run to this location to the positive and negative terminals on the rear of the speaker. 4) Remove the magnetic grill on the front of the speaker, this will give you access to the dog ear mounting clips. Tighten the clips until the dog ears bite down and hold the speaker in place. 5) You can now reattach the magnetic grill and you are ready to go.