Condition: 100% BRAND NEW Typical Flow Rate in CC per minute: 550 CC/min @ 43.5 PSI Typical Flow Rate in LB per hour: 48 LBS/ @ 43.5 PSI Resistance: 12 ohms (high impedance, high resistance) Voltage: 8-15 Volts, nominal 13.5 Volts; High resistance (approximately 12 OHMS) saturated fuel injectors fit many applications, including but not limited to: for 1986-1991 (must remove resistor housing part number, may need clips) for 1992-2001 (1996+ clips required) for 1988-1997 Accord 4-cylinder engines (must remove resistor housing part number, may need clips) for 1998-2002 Accord 4-cylinder engines (clips required) for 1988-1991 (must remove resistor housing part number) for 1992-2000 (1996+ clips required) for 1988-1991 CRX (must remove resistor housing part number (Item No.) For 1992-1995 Del Sol For 1992-1996 Prelude (Must Remove Resistor Housing Item No.) For 1997-2001 Prelude (1997+ Clips REQUIRED) Any OBD 0, OBD 1, B-Series, D-Series, or H-Series Engine You can still run